AEIO-360-H1A Engine, 09/16/00 |
Used AEIO-360-H1A Engine selected, 09/16/00 |
Motor mount and gear legs installed, 09/21/00 |
Finally the airframe is supporting its own weight, 09/23/00 |
Brake master cylinder installed, 09/21/00 |
Starter relay installed, 10/20/00 |
Heater box installed, 10/20/00 |
Inverted oil system valve installed, 10/21/00 |
Engine mounted, 10/22/00 |
Oil separator mounted and hoses connected, 11/15/00 |
Throttle cable mount fabricated and installed, 11/20/00 |
Mixture cable mount fabricated and installed, 11/21/00 |
Vetterman 4 pipe exhaust installed, 11/24/00 |
Vetterman 4 pipe exhaust installed, 11/24/00 |
Vetterman 4 pipe exhaust installed, 11/24/00 |
Installed the oil and fuel pressure senders, 12/09/00 |
Front baffling with oil coller mount built, 01/10/01 |
Front baffling with oil coller mount built, 01/10/01 |
Working on baffling, 01/12/01 |
Baffling completed, 01/28/01 |
Baffling completed, 01/28/01 |
Building the air box, 02/15/01 |
Air box completed, 02/16/01 |
Air vent installed, 04/06/01 |
Air vent installed, 04/06/01 |
Heater vent installed, 04/01/01 |
Heater vent installed, 04/01/01 |
Engine installation completed, 06/10/01 |
